Need help?Do you have a question about the SPXFLOW C Series and is the answer not in the manual?
General| Brand | SPXFLOW |
|---|---|
| Model | C Series |
| Category | Water Pump |
| Language | English |
Procedure for reporting transit damage or loss of equipment.
Process for submitting warranty claims and required authorization.
Guidelines for safe operation, installation, and servicing of equipment.
Ensuring proper function and replacement of safety locking and interlocking mechanisms.
Recommendations for regular equipment checks and maintenance intervals.
Guidelines for selecting and using manufacturer-recommended replacement parts.
Information on preventing corrosion and maintaining stainless steel surfaces.
Procedures for handling elastomer seals after passivation processes.
Key specifications including capacity, viscosity, temperature, and pressure.
Guidance on selecting an appropriate site for pump installation.
Instructions for ensuring the pump is installed on a level surface.
Recommendations for proper setup of inlet and outlet piping systems.
Common installation errors and their potential consequences.
Instructions and safety precautions for connecting the pump's electrical system.
Pre-operational checks and preparations before initial pump use.
Safety measures to follow during cleaning operations.
Critical safety warnings and precautions for operating the pump.
Step-by-step guide for safely starting the pump motor.
Procedures for filling the pump casing with liquid before operation.
Instructions on how to safely shut down the pump.
Key safety precautions to observe during maintenance activities.
Overview of planned maintenance activities for the pump.
Regular checks and procedures to ensure optimal pump performance.
Detailed steps for taking apart pumps with a pin impeller.
Detailed steps for reassembling pumps with a pin impeller.
Detailed steps for taking apart pumps with a sealed impeller.
Detailed steps for reassembling pumps with a sealed impeller.
Information and procedures related to the DG type seal.
Details on the Type E water-cooled double seal.
List of components and part numbers for the C-100 pump model.
List of components and part numbers for the C-114 pump model.
List of components and part numbers for the C-216 pump model.
List of components and part numbers for the C-218 pump model.
List of components and part numbers for the C-328 pump model.
Details and part numbers for C-Series D seal replacement kits.
Parts list for motor mounts for specific frame sizes.
Parts list for motor mounts for specific frame sizes.
Components and part numbers for converting pin to sealed impellers.
Common issues and solutions when the pump delivers insufficient liquid.
Troubleshooting steps for when the pump fails to generate adequate pressure.
Causes and corrective actions for motor overload conditions.
Identifying and resolving issues related to pump vibration and noise.
Factors contributing to premature seal wear and how to prevent it.
Diagnosing and fixing common causes of seal leakage.
To Next Page
