SPXFLOW C Series - C-Series Pin Impeller to Sealed Impeller Conversion Kits

Parts Lists Waukesha Cherry-Burrell
®
Brand C-Series Pump
Page 80 95-03008-IEC 01/2019
C-Series Pin Impeller to Sealed Impeller Conversion Kits
Full-size impeller part numbers:
Note:
1. Full impeller size part numbers are listed. Contact your local
distributor for other impeller sizes and fin-
ishes.
Kits include (item numbers from previous parts pages):
Item 3, Impeller nut
Item 5, Shaft collar
Item 6, Stub shaft
Item 7, Impeller key
Item 4/8, 2 FKM and 2 EPD
M O-rings.
Use either the FKM or EPDM O-rings--the unused O-rings can
be discarded.
Note: Kits do NOT include the impeller. See impeller part
n
umbers below.
Model
Frame Kit Part No.
C100
D71 138664+
D71 138668+
D80 138669+
D90L 138670+
D80 138676+
D90L 138677+
D100L/D112M 138678+
D132S 138679+
D90L 138686+
D100L/D112M 138687+
D132S 138688+
D160M 138689+
D90L 138697+
D100L/D112M 138698+
D132S 138699+
D160M 138700+
D180M 138701+
PL5050-CH18
C114
C216
C218
C328
Description Part No.
Note
C100 Impeller - Sealed Impeller Design, Full, 3.68" dia., 32 Ra finish 138526+ 1
C114 Impeller - Sealed Impeller Design, Full, 4.0" dia., 32 Ra finish 138527+ 1
C216 Impeller - Sealed Impeller Design, Full, 6.0" dia., 32 Ra finish 138528+ 1
C218 Impeller - Sealed Impeller Design, Full, 7.875" dia., 32 Ra finish 138529+ 1
C328 Impeller - Sealed Impeller Design, Full, 8.0" dia., 32 Ra finish 138530+ 1
PL5050-CH19