Need help?Do you have a question about the SPXFLOW C-216 and is the answer not in the manual?
Essential safety precautions, including DANGER, WARNING, and CAUTION notices.
Guidelines for controlling hazardous energy sources during maintenance.
Procedures for safely connecting the pump's electrical components.
Steps for conducting a preliminary test run and checking motor load.
Critical safety precautions to observe during pump operation.
Step-by-step instructions for safely starting the pump.
Methods for priming the pump, depending on liquid supply level.
Crucial safety guidelines to follow before performing maintenance.
Detailed steps for disassembling a pin impeller design pump.
Detailed steps for assembling a pin impeller design pump.
Detailed steps for disassembling a sealed impeller design pump.
Detailed steps for assembling a sealed impeller design pump.
Instructions for installing various types of pump seals.
General| Flow Rate | Up to 48 GPM (182 LPM) |
|---|---|
| Material | 316 Stainless Steel |
| Pump Type | Centrifugal |
| Pressure | Up to 150 PSI (10.3 bar) |
| Head | Up to 345 ft (105 m) |
To Next Page
