SQlab 702 - Wear, Storage, and Distributor Information; Wear and Warranty Exclusion; Optimal Storage Conditions; Manufacturer Contact Details

SQlab | SPORTS ERGONOMICS | 702, 710, 711 AND 7OX | EDITION US 2019-01 | Page 13
Wear and storage
Bicycles and their components are subject to function-related, mostly usage-dependent wear, such as the abrasion of tyres, handles
and brake pads. Environmental wear results from storage under aggressive environmental conditions, such as solar radiation, rain, wind
and sand.
Wear is not covered by the warranty.
SQlab GmbH, Postweg 4, 82024 Tauirchen, Germany
A list of our national and international distributors and dealers can be found on our website:
http://www.sq-lab.com
Manufacturers and distributors
Foreign distributors, dealers and addresses
Note
Note
Store your SQlab grips (mounted or unmounted) under the following conditions:
• Away from direct sunlight.
• Storage at temperatures between -10 ° C and 40 ° C.
• Humidity of below 60%.