SRAM BlipBox - BlipBox Functionality Overview

6
BlipBox
TM
BlipBox
TM
BlipBox
TM
BlipBox
TM
BlipBox
TM
BlipBox
TM
BlipBox
TM
BlipBox
TM
BlipBox
TM
The BlipBox wirelessly pairs to each
derailleur, sends shift signals to the
front and rear derailleurs when the
Blips are pressed, and shifts the
derailleurs when the
,
FD
and
buttons are pressed. The BlipBox is not
required when the Blips are connected
to eTap™ road shifters.
The BlipBox wirelessly pairs to each
derailleur, sends shift signals to the
front and rear derailleurs when the
Blips are pressed, and shifts the
derailleurs when the
,
FD
and
buttons are pressed. The BlipBox is not
required when the Blips are connected
to eTap™ road shifters.
The BlipBox wirelessly pairs to each
derailleur, sends shift signals to the
front and rear derailleurs when the
Blips are pressed, and shifts the
derailleurs when the
,
FD
and
buttons are pressed. The BlipBox is not
required when the Blips are connected
to eTap™ road shifters.
The BlipBox wirelessly pairs to each
derailleur, sends shift signals to the
front and rear derailleurs when the
Blips are pressed, and shifts the
derailleurs when the
,
FD
and
buttons are pressed. The BlipBox is not
required when the Blips are connected
to eTap™ road shifters.
The BlipBox wirelessly pairs to each
derailleur, sends shift signals to the
front and rear derailleurs when the
Blips are pressed, and shifts the
derailleurs when the
,
FD
and
buttons are pressed. The BlipBox is not
required when the Blips are connected
to eTap™ road shifters.
The BlipBox wirelessly pairs to each
derailleur, sends shift signals to the
front and rear derailleurs when the
Blips are pressed, and shifts the
derailleurs when the
,
FD
and
buttons are pressed. The BlipBox is not
required when the Blips are connected
to eTap™ road shifters.
The BlipBox wirelessly pairs to each
derailleur, sends shift signals to the
front and rear derailleurs when the
Blips are pressed, and shifts the
derailleurs when the
,
FD
and
buttons are pressed. The BlipBox is not
required when the Blips are connected
to eTap™ road shifters.
The BlipBox wirelessly pairs to each
derailleur, sends shift signals to the
front and rear derailleurs when the
Blips are pressed, and shifts the
derailleurs when the
,
FD
and
buttons are pressed. The BlipBox is not
required when the Blips are connected
to eTap™ road shifters.
The BlipBox wirelessly pairs to each
derailleur, sends shift signals to the
front and rear derailleurs when the
Blips are pressed, and shifts the
derailleurs when the
,
FD
and
buttons are pressed. The BlipBox is not
required when the Blips are connected
to eTap™ road shifters.