Need help?Do you have a question about the SRAM BlipBox and is the answer not in the manual?
General| Placement | Handlebar |
|---|---|
| Connectivity | Wireless |
| Mounting | Handlebar clamp |
| Water Resistance | IPX7 |
| Compatibility | SRAM eTap AXS |
| Function | Shifting |
| Battery Life | Approximately 2 years |
Manual emphasizes need for specialized tools and qualified mechanic for installation.
Crucial safety warnings regarding improper installation and potential severe injuries.
Instructions to register products online for software updates and information.
Explains how the BlipBox wirelessly pairs with derailleurs and sends shift signals.
Identifies key components of the Blip and BlipBox system via labels (a-g).
Provides critical warnings regarding dummy plug usage and general device handling precautions.
Step-by-step guide for installing the BlipBox mount onto a bar extension.
Presents different types of stem mounts: Flat, Curved, and Rubber Band.
Details the process of attaching mounts using adhesive tabs and cleaning surfaces.
Explains how to attach mounts to the stem using the included rubber bands.
Guides on how to attach the BlipBox to the installed mount and lock it.
Instructions for attaching Blips to the bar extension after cleaning.
Step-by-step guide for installing BlipGrips onto bar extensions.
Details on cleaning aero bars and attaching Blips ergonomically.
Guides for attaching Blips to drop bars using adhesive (Option 1) or clamp (Option 2).
Instructions for folding shifter hood, removing dummy plug, and connecting Blip wires.
Guidelines for measuring, routing, and securing Blip wires to the handlebar.
Specifies minimum wire length and acceptable routing methods for signal transmission.
Illustrates and explains routing Blip wires internally or externally.
Specific instructions for routing Blip wires on drop handlebars.
Step-by-step guide for initiating and completing the component pairing process.
Instructions on how to verify successful pairing and end the session.
Explains how each Blip satellite shifter actuates derailleur shifts when pressed.
Details how to use the left Blip to move the rear derailleur inboard.
Details how to use the right Blip to move the rear derailleur outboard.
Guide to micro-adjusting the rear derailleur inboard to eliminate chain rub or noise.
Guide to micro-adjusting the rear derailleur outboard to eliminate chain rub or noise.
Instructions for shifting the front derailleur using Blips or the BlipBox.
How to rotate, adjust BlipGrips, and tighten clamp bolts for desired position.
Explains how LED colors indicate the remaining ride time and battery status.
Step-by-step instructions for replacing the coin cell battery.
Critical safety warnings regarding battery handling, storage, and disposal.
Recommendations for periodic cleaning and inspecting Blip connector wires for damage.
Warnings about cleaning methods, storage conditions, and avoiding liquids/heat.
Information on battery recycling programs and disposal warnings.
Lists compliance with directives like R&TTE, WEEE, RoHS, REACH, FCC, and IC.
Detailed specifications for the rechargeable battery and charger model.
To Next Page
