SRAM BlipBox - Verifying and Ending Component Pairing

28
Adjust Régler Ajustar
Einstellen Regolare
調節
Ajustar Afstellen
调节
To end the pairing session, press and
release the function button on the rear
derailleur. Verify the system is paired
by shifting the derailleurs in both
directions.
To end the pairing session, press and
release the function button on the rear
derailleur. Verify the system is paired
by shifting the derailleurs in both
directions.
To end the pairing session, press and
release the function button on the rear
derailleur. Verify the system is paired
by shifting the derailleurs in both
directions.
To end the pairing session, press and
release the function button on the rear
derailleur. Verify the system is paired
by shifting the derailleurs in both
directions.
To end the pairing session, press and
release the function button on the rear
derailleur. Verify the system is paired
by shifting the derailleurs in both
directions.
To end the pairing session, press and
release the function button on the rear
derailleur. Verify the system is paired
by shifting the derailleurs in both
directions.
To end the pairing session, press and
release the function button on the rear
derailleur. Verify the system is paired
by shifting the derailleurs in both
directions.
To end the pairing session, press and
release the function button on the rear
derailleur. Verify the system is paired
by shifting the derailleurs in both
directions.
To end the pairing session, press and
release the function button on the rear
derailleur. Verify the system is paired
by shifting the derailleurs in both
directions.
4