SRAM BlipBox - Blip Wire Routing on Drop Bars

22
1a
1b
Route each Blip wire, internally (1a) or
externally (1b), on the handlebar and
plug the connector into the BlipBox;
left (-), right (+).
Route each Blip wire, internally (1a) or
externally (1b), on the handlebar and
plug the connector into the BlipBox;
left (-), right (+).
Route each Blip wire, internally (1a) or
externally (1b), on the handlebar and
plug the connector into the BlipBox;
left (-), right (+).
Route each Blip wire, internally (1a) or
externally (1b), on the handlebar and
plug the connector into the BlipBox;
left (-), right (+).
Route each Blip wire, internally (1a) or
externally (1b), on the handlebar and
plug the connector into the BlipBox;
left (-), right (+).
Route each Blip wire, internally (1a) or
externally (1b), on the handlebar and
plug the connector into the BlipBox;
left (-), right (+).
Route each Blip wire, internally (1a) or
externally (1b), on the handlebar and
plug the connector into the BlipBox;
left (-), right (+).
Route each Blip wire, internally (1a) or
externally (1b), on the handlebar and
plug the connector into the BlipBox;
left (-), right (+).
Route each Blip wire, internally (1a) or
externally (1b), on the handlebar and
plug the connector into the BlipBox;
left (-), right (+).
Install
Einbauen
Instalación
Installer
Installare
Monteren
Instalar