SRAM BlipBox - BlipBox Handling and Warnings

8
Remove the dummy plugs from
the BlipBox.
NOTICE
Do not discard the dummy plugs.
Reinstall if Blip connector wire
is removed.
WARNING
Do not use or clean the BlipBox or
eTap shifters without connector wires
or dummy plugs installed. Moisture will
damage the BlipBox and eTap shifters.
Remove the dummy plugs from
the BlipBox.
NOTICE
Do not discard the dummy plugs.
Reinstall if Blip connector wire
is removed.
WARNING
Do not use or clean the BlipBox or
eTap shifters without connector wires
or dummy plugs installed. Moisture will
damage the BlipBox and eTap shifters.
Remove the dummy plugs from
the BlipBox.
NOTICE
Do not discard the dummy plugs.
Reinstall if Blip connector wire
is removed.
WARNING
Do not use or clean the BlipBox or
eTap shifters without connector wires
or dummy plugs installed. Moisture will
damage the BlipBox and eTap shifters.
Remove the dummy plugs from
the BlipBox.
NOTICE
Do not discard the dummy plugs.
Reinstall if Blip connector wire
is removed.
WARNING
Do not use or clean the BlipBox or
eTap shifters without connector wires
or dummy plugs installed. Moisture will
damage the BlipBox and eTap shifters.
Remove the dummy plugs from
the BlipBox.
NOTICE
Do not discard the dummy plugs.
Reinstall if Blip connector wire
is removed.
WARNING
Do not use or clean the BlipBox or
eTap shifters without connector wires
or dummy plugs installed. Moisture will
damage the BlipBox and eTap shifters.
Remove the dummy plugs from
the BlipBox.
NOTICE
Do not discard the dummy plugs.
Reinstall if Blip connector wire
is removed.
WARNING
Do not use or clean the BlipBox or
eTap shifters without connector wires
or dummy plugs installed. Moisture will
damage the BlipBox and eTap shifters.
Remove the dummy plugs from
the BlipBox.
NOTICE
Do not discard the dummy plugs.
Reinstall if Blip connector wire
is removed.
WARNING
Do not use or clean the BlipBox or
eTap shifters without connector wires
or dummy plugs installed. Moisture will
damage the BlipBox and eTap shifters.
Remove the dummy plugs from
the BlipBox.
NOTICE
Do not discard the dummy plugs.
Reinstall if Blip connector wire
is removed.
WARNING
Do not use or clean the BlipBox or
eTap shifters without connector wires
or dummy plugs installed. Moisture will
damage the BlipBox and eTap shifters.
Remove the dummy plugs from
the BlipBox.
NOTICE
Do not discard the dummy plugs.
Reinstall if Blip connector wire
is removed.
WARNING
Do not use or clean the BlipBox or
eTap shifters without connector wires
or dummy plugs installed. Moisture will
damage the BlipBox and eTap shifters.
Remove Retirer Retirar
Entfernen Rimuovere
取り外し
Quitar Verwijderen
拆卸
1