EasyManua.ls Logo

SRAM BlipBox - Blip Installation on Bar Extensions

SRAM BlipBox
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Install
Einbauen
Instalación
Installer
Installare
Monteren
Instalar
Bar Extension Bar Extension Bar Extension
Bar Extension Bar Extension Bar Extension
Bar Extension Bar Extension Bar Extension
Clean the bar extension with
isopropyl alcohol.
Attach the Blip to the bar with the
adhesive tab in the desired
ergonomic position.
NOTICE
The Blip can be located anywhere on
the bar extension.
Clean the bar extension with
isopropyl alcohol.
Attach the Blip to the bar with the
adhesive tab in the desired
ergonomic position.
NOTICE
The Blip can be located anywhere on
the bar extension.
Clean the bar extension with
isopropyl alcohol.
Attach the Blip to the bar with the
adhesive tab in the desired
ergonomic position.
NOTICE
The Blip can be located anywhere on
the bar extension.
Clean the bar extension with
isopropyl alcohol.
Attach the Blip to the bar with the
adhesive tab in the desired
ergonomic position.
NOTICE
The Blip can be located anywhere on
the bar extension.
Clean the bar extension with
isopropyl alcohol.
Attach the Blip to the bar with the
adhesive tab in the desired
ergonomic position.
NOTICE
The Blip can be located anywhere on
the bar extension.
Clean the bar extension with
isopropyl alcohol.
Attach the Blip to the bar with the
adhesive tab in the desired
ergonomic position.
NOTICE
The Blip can be located anywhere on
the bar extension.
Clean the bar extension with
isopropyl alcohol.
Attach the Blip to the bar with the
adhesive tab in the desired
ergonomic position.
NOTICE
The Blip can be located anywhere on
the bar extension.
Clean the bar extension with
isopropyl alcohol.
Attach the Blip to the bar with the
adhesive tab in the desired
ergonomic position.
NOTICE
The Blip can be located anywhere on
the bar extension.
Clean the bar extension with
isopropyl alcohol.
Attach the Blip to the bar with the
adhesive tab in the desired
ergonomic position.
NOTICE
The Blip can be located anywhere on
the bar extension.
2
Measure Mesurer Medir
Messen Misurare
計測
Medir Meten
测量
1

Related product manuals