SRAM BlipBox - Blip Installation on Shifters

25
Install
Einbauen
Instalación
Installer
Installare
Monteren
Instalar
Remove Retirer Retirar
Entfernen Rimuovere
取り外し
Quitar Verwijderen
拆卸
Adjust Régler Ajustar
Einstellen Regolare
調節
Ajustar Afstellen
调节
3
Fold the hood cover
back and remove the
dummy plug.
Fold the hood cover
back and remove the
dummy plug.
Fold the hood cover
back and remove the
dummy plug.
Fold the hood cover
back and remove the
dummy plug.
Fold the hood cover
back and remove the
dummy plug.
Fold the hood cover
back and remove the
dummy plug.
Fold the hood cover
back and remove the
dummy plug.
Fold the hood cover
back and remove the
dummy plug.
Fold the hood cover
back and remove the
dummy plug.
1
2
Shifter Shifter Shifter
Shifter Shifter Shifter
Shifter Shifter Shifter
Plug the wire connector
into the shifter.
Plug the wire connector
into the shifter.
Plug the wire connector
into the shifter.
Plug the wire connector
into the shifter.
Plug the wire connector
into the shifter.
Plug the wire connector
into the shifter.
Plug the wire connector
into the shifter.
Plug the wire connector
into the shifter.
Plug the wire connector
into the shifter.