SRAM BlipBox - Page 24

24
Install
Einbauen
Instalación
Installer
Installare
Monteren
Instalar
Torque Serrage Momento de torção
Drehmoment Coppia
締め付け
Par de apriete Aandraaimoment
扭紧
Measure Mesurer Medir
Messen Misurare
計測
Medir Meten
测量
2
Insert the Blip into the clamp. Attach
the clamp to the handlebar and rotate
to the desired position. Tighten the
clamp bolt.
Insert the Blip into the clamp. Attach
the clamp to the handlebar and rotate
to the desired position. Tighten the
clamp bolt.
Insert the Blip into the clamp. Attach
the clamp to the handlebar and rotate
to the desired position. Tighten the
clamp bolt.
Insert the Blip into the clamp. Attach
the clamp to the handlebar and rotate
to the desired position. Tighten the
clamp bolt.
Insert the Blip into the clamp. Attach
the clamp to the handlebar and rotate
to the desired position. Tighten the
clamp bolt.
Insert the Blip into the clamp. Attach
the clamp to the handlebar and rotate
to the desired position. Tighten the
clamp bolt.
Insert the Blip into the clamp. Attach
the clamp to the handlebar and rotate
to the desired position. Tighten the
clamp bolt.
Insert the Blip into the clamp. Attach
the clamp to the handlebar and rotate
to the desired position. Tighten the
clamp bolt.
Insert the Blip into the clamp. Attach
the clamp to the handlebar and rotate
to the desired position. Tighten the
clamp bolt.
3
4
2.5
0.23 N·m
(2.0 in-lb)
1
Option 2 Option 2 Option 2
Option 2 Option 2 Option 2
Option 2 Option 2 Option 2