INSTRUMENTS AND CONTROLS 3–21
PASSING LIGHT SWITCH
To flash the high beam, pull the lever to-
wards the steering wheel and release it.
The lever will be returned to the normal po-
sition when released.
The high beam headlights stay on as long
as you hold the lever.
FRONT FOG LAMP SWITCH*
Fog lamps provide auxiliary illumination and
improve vision in fog or snow.
To turn on the front fog lamps, rotate the fog
lamp knob on the combination switch lever
to the
or
position.
To turn off the front fog lamps, rotate the
fog lamp knob to “OFF” position.
WINDSHIELD WIPER SWITCH
To operate the windshield wipers, move the
wiper lever in 3 downwards steps with the
ignition on.
OFF = o ff
AUTO = Automatic wipe
LO = Continuous wipe, slow speed
HI = Continuous wipe, fast speed
K140_RHD_EN_03.p65 2004-11-11, ¿ÀÈÄ 4:0821
To Next Page
Loading...
Need help?
General
