EarthLead
■AC adapter
■Dust protection sticker
■Measurement signal cabl
Cautions When Measuring With the Measurement Signal Cable
■ Step onto the measurement stand with your feet together so that your shoes do not
protrude from the stainless steel plate, and then press the touch button.
■ Since the resistance of shoes varies according to the temperature, humidity, and dirt and
friction on the bottom of the shoe, perform periodic measurements and maintenance
management.
■ Note that the resistance value will be higher when thick socks are worn.
■ The measured value may differ if your body is touching a metal plate or other objects
other than the touch button.
■ Do not press the touch button roughly.
To Next Page
Loading...
