SSD Statiron DZ4 User Manual

Instruction Manual
Static Field Meter STATIRON
DZ4
Thank you for purchasing the Statiron DZ4. Please read this manual before using the
product in order to fully understand its functions. Also make sure to store this manual so
that it can be referred to in the future.
Functions
The static field meter Statiron DZ4 is a portable static electrical potential meter with digital readout, for measuring
the electrical potential of charged objects.
When measuring fluctuating static electricity, you can temporarily hold an indicated value, and check maximum
voltages in the MAX mode.
Characteristics
1. Enables you to measure surface potentials of charged bodies without coming into contact.
2. Enables you to take measurements in narrow locations by rotating the sensor head.
3. With the optional ion balance plate, you can carry out ionizer balance checks.
SHISHIDO ELECTROSTATIC, LTD.

SSD Statiron DZ4 Specifications

General

Brand	SSD
Model	Statiron DZ4
Category	Measuring Instruments
Language	English

Summary

Safety Precautions

Installation

Conditions to avoid for proper operation and safety, preventing malfunctions and potential hazards.

Maintenance

Procedures for cleaning and upkeep to ensure device longevity and prevent insulation faults.

Handling

Precautions for safe and correct operation, including electrical safety and device care.

Items Included With the Device

Main Device

Overview of the primary static field meter unit and its components.

Important Points About Taking Measurements

Grounding

Importance of grounding for accurate measurements and preventing discharge damage.

Adjusting the Measurement Distance

Guidelines for optimal sensor-to-object distance for accurate readings.

Influence of the size of the charged object

How object size affects measurement accuracy and potential corrections.

Influence of other objects

Impact of surrounding objects on the measured electrical field and accuracy.

Influence of charged particles etc.

How charged particles or dust affect measurement readings and cause errors.

Preparation

Measuring Static Electricity

Step-by-step guide for turning on the meter and setting modes for static electricity measurement.

Measuring Ion Balance

Procedure

Steps for attaching the ion balance plate and measuring offset voltage.

Adjustment and Maintenance

Rotating the Sensor Head

Instructions on how to rotate the sensor head for measurements in narrow locations.

Battery Indicator

Explanation of the battery charge display and when to replace the battery.

Error Display

Information on error messages, their causes, and troubleshooting steps.

Troubleshooting

Specifications

Warranty