Need help?Do you have a question about the SSK SD301 and is the answer not in the manual?
Supports Windows, Mac OS, iPad OS, Android, Linux systems with good interface compatibility.
Features SSD architecture for continuous, stable, high-speed reading/writing and uses 3D NAND FLASH for data security.
Has a metal shell for performance, durability, and heat dissipation, available in 128GB to 2TB capacities.
Keep the USB connector clean and wipe it with a soft cloth if dirty.
Plug directly into USB ports of compatible devices and back up important data.
Explains differences between manufacturer (1GB=1024MB) and OS (1GB=1000MB) capacity calculations.
Formatted capacity is less than nominal; actual usable capacity must be >=90% of nominal.
Plug the drive into a USB port, ensuring correct orientation to avoid damage.
Follow system procedures to safely remove the drive from the USB port.
Safely eject via the taskbar icon, wait for confirmation, then unplug.
Eject the product icon from the desktop via a secondary click.
Normal for the drive to heat up during use due to fast read/write speeds.
Connect directly to motherboard USB ports for better power and signal stability.
Use high-speed USB interfaces and ensure target host supports it for optimal performance.
Speed is affected by file type; large single files are faster than many small files.
General| Interface | USB 3.2 Gen 2 |
|---|---|
| Read Speed | Up to 550 MB/s |
| Type | SSD |
| Capacity | 1TB |
| Compatibility | Windows, macOS, Android |
To Next Page
