SSK SD301 - Connecting and Using the Flash Drive; Connecting the Drive; Disconnecting the Drive

03
Ⅴ. Compatible with USB interface
The supported host interfaces are as follows:
USB3.2Gen2X2 20Gbps;
USB3.2Gen2 10Gbps (i.e. USB3.1Gen2);
USB3.2Gen1 5Gbps (i.e. USB3.1Gen1/USB3.0);
USB2.0;
Ⅵ. Connection and using
A. Connecting the Portable solid state flash drive:
Plug the product into a USB port on the host device as
directed in the host device user manual.
Forcing insertion may damage the product or the USB port,
and may even cause it to deform and rupture.
Please be sure to correctly grasp the direction and force, and
try to insert this product into the USB port on the host
device.
Improper insertion or incorrect orientation may prevent the
product from functioning properly.
B. Disconnect the Portable solid state flash drive:
When the host device is running normally, please follow the
steps below to remove the product from the USB port of the
host device.
*Note: the read and write speed may vary due to different host devices.
(USB-C or USB-A )