Ssl DD999ACPW - Parking Brake and Amplifier Wiring; Parking Brake and Remote Output

3232
Connecons
Parking Brake and Amplier Remote Output Wiring
WARNING
Improper connecon or use of the parking
brake status wire (e.g. defeang the safety
feature) violates Federal, State, and Local laws.
This may lead to injury, property damage, and/
or death.
Watching videos or photos while driving is
against Federal, State, and Local laws.
CAUTION
Remote output is rated at 500mA max. It is
recommended to use a relay if addional power
is required.
NOTE
For Android Auto setup, the parking brake
status wire MUST be connected.
Review the connecon of this product to
properly integrate the parking brake wire to the
vehicle.
Video and photo cannot be viewed while
driving. The vehicle must be staonary and the
parking brake applied to enable viewing.
To power terminal on an amplier (not included)
AMP Remote Output (Blue/white)
Parking Brake Input (Light green)
To vehicle’s parking brake switch
NOTE
Parking brake wire locaon varies from vehicles.
Consult a cered professional installer