Change the Source (MODE)
MODE
Loudness on/off
LOUD
Preset EQ (Equalizer)
EQ
Hands-free Microphone
Aux input connector
Reset System (Reset)
RESET
RESET
Press the button to switch between RADIO, BT(Bluetooth), USB(with USB device
inserted), CARD(with SD card inserted) and AUX-IN(auxiliary input) modes.
The muted state
will be also released when the volume knob is used.
Press the button on the remote control to turn on the loudness to reinforce the output
of bass frequencies, press again to turn it off.
Press the button on the front panel or on the remote control to toggle between EQ OFF,
FLAT, POP, ROCK, CLASS.
The charging current consumption is 1 ampere.
To receive your voice when you calling by using this bluetooth handsfree system.
The 3.5mm auxiliary input stereo connection is designed for deiveces with 3.5mm line-out or
headphone output.
The button is used to reset all parameters to factory default settings.
This function may be used when the LCD does not display normally or sound is distorted, or
when any of controls are disabled. To reset your system, use a thin object with a pointed end
to depress the button.
Mute on/off
MUTEIn power on mode, briefly press the button to toggle mute on or off.
The USB port of this car radio is designed for media playback from flash memory devices and
charging for iPhone / andriod mobile phone.
This SD card slot is designed for media playback from SD card.
USB port
SD card slot
GENERAL OPERATION (CONT.)
6
To Next Page
Loading...
