ST NUCLEO-L476RG User Manual

August 2020 UM1724 Rev 14 1/68
1
UM1724
User manual
STM32 Nucleo-64 boards (MB1136)
Introduction
The STM32 Nucleo-64 boards based on the MB1136 reference board (NUCLEO-F030R8,
NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC, NUCLEO-F103RB,
NUCLEO-F302R8, NUCLEO-F303RE, NUC
LEO-F334R8, NUCLEO-F401RE,
NUCLEO-F410RB, NUCLEO-F411RE, NU
CLEO-F446RE, NUCLEO-L010RB,
NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L152RE
, NUCLEO-L452RE,
NUCLEO-L476RG
) provide an affordable and flexible way for users to try out new concepts
and build prototypes with the STM32 microcontrollers in the LQFP64 package, choosing
from the various combinations of performance, power consumption, and features. The
ARDUINO
®
Uno V3 connectivity support and the ST morpho headers provide an easy
means of expanding the functionality of the Nucleo open development platform with a wide
choice of specialized shields. The STM32 Nucleo boards do not require any separate probe
as they integrate the ST-LINK/V2-1 debugger and programmer. The STM32 Nucleo boards
come with the comprehensive free software libraries and examples available with the
STM32Cube MCU Packages, as well as direct access to the Arm
®
Mbed
™
online resources
at
http://mbed.org/ .
Figure 1. STM32 Nucleo-64 board
Picture is not contractual.
www.st.com

ST NUCLEO-L476RG Specifications

General

Brand	ST
Model	NUCLEO-L476RG
Category	Motherboard
Language	English

Summary

Features

Ordering Information

Development Environment

Quick Start

5.1 Getting Started

Step-by-step guide to configure and launch demo software.

5.2 NUCLEO-L476RG Bootloader Limitations

Hardware Layout and Configuration

6.2 Embedded ST-LINK/V2-1

Details on the integrated debugging and programming tool.

6.2.1 Driver

6.2.2 ST-LINK/V2-1 Firmware Upgrade

6.2.3 Using ST-LINK/V2-1 to Program and Debug STM32

How to use the on-board debugger for STM32 programming.

6.2.4 Using ST-LINK/V2-1 for External STM32 Application

How to program an external STM32 using the board's debugger.

6.3 Power Supply and Power Selection

Options and methods for powering the Nucleo board.

6.3.1 Power Supply Input from USB Connector

Details on powering the board via USB and current limits.

6.3.2 External Power Supply Inputs: VIN and E5V

Information on using external power sources VIN and E5V.

6.7.1 OSC Clock Supply

6.7.2 OSC 32 kHz Clock Supply

6.11 ARDUINO® Connectors

Pin assignments and compatibility for Arduino Uno V3 connectors.

6.12 ST Morpho Connector

Pin assignments for the ST morpho connector.

Nucleo-64 Boards Information