To Next PageTo Next Page
Need help?Do you have a question about the STA-RITE HRPB30 and is the answer not in the manual?
General| Category | Water Filtration Systems |
|---|---|
| Tank Material | Fiberglass |
| Media Type | Birm |
| Model | HRPB30 |
| Type | Backwash Filter |
| Valve Type | Automatic |
| Air Relief | Automatic |
Hazard warnings for serious personal injury, death, or major property damage.
Hazard warnings for serious personal injury, death, or major property damage.
Hazard warnings for minor personal injury or property damage.
Special instructions not related to hazards.
Warnings about potential severe injury or property damage from improper installation or testing.
Essential safety checks before performing pressure tests on the filter.
Critical safety measures when working on the pump or motor components.
Specifies maximum water temperature and operating pressure for the filter.
Details the specific types and grades of sand recommended for filter use.
Guidelines for selecting a suitable location and mounting for the filter.
Best practices and code compliance for filter piping installation.
Recommendations for valve installation and wastewater disposal.
Steps to take before starting the filter disassembly process.
Instructions for taking the filter apart safely and systematically.
Procedure for correctly adding sand to the filter tank.
Instructions for reassembling the filter after maintenance or repair.
Step-by-step guide for starting up the filter with a multi-port valve.
Step-by-step guide for starting up the filter with a slide valve.
Instructions for operating the filter in the normal filtration mode.
Detailed steps for backwashing using multi-port or slide valves.
Routine cleaning and inspection of the filter's exterior and sand bed.
Recommended checks for the pool equipment on a weekly basis.
Steps for replacing internal filter components like laterals.
Instructions for preparing the filter for cold weather to prevent damage.
Identifies causes and remedies for frequent backwashing cycles.
Diagnoses issues causing reduced water flow and increased system pressure.
Addresses problems related to low water flow and pressure.
Explains reasons for unclear pool water and potential solutions.
