EasyManua.ls Logo

STA-RITE Posi Clear PXC95 - User Manual

STA-RITE Posi Clear PXC95
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Posi Clear
TM
Cartridge Filters
Models PXC75, PXC95, PXC125 and PXC150
O W N E R’ S M A N U A L
INSTALLATION, OPERATION & PARTS
Sta-Rite Pool/Spa Group
293 Wright Street, Delavan, WI 53115
International: 262-728-5551, FAX: 262-728-7550
www.starite.com
Union City, TN • Delavan, WI • Mississauga, ON
© 2005, Sta-Rite Industries S620 (Rev. 12/5/05)
This manual should be furnished to
the end user of this filter; its use will
reduce service calls and chance of
injury and will lengthen filter life.
PUSH
PU
SH
PUSH
PUSH
PUSH
E
N
G
L
I
S
H
F
R
A
N
Ç
A
I
S
E
S
P
A
Ñ
O
L

Table of Contents

Questions and Answers

  • A
    Aaron HolmesJul 31, 2025
    Why is my STA-RITE Water Filtration Systems pool water not clean?
    • F
      Felicia AyalaJul 31, 2025
      If your pool water isn't clean, it could be due to several reasons. The chlorine residual might be too low, so maintain an adequate chlorine residual, consulting a pool service technician for the right level. Alternatively, the filter cartridge might be torn, plugged, or punctured, requiring replacement. The pool water might also contain iron. In this case, consult your pool professional. Another potential cause is heavy or improper application of powdered chlorine tablets using a binder, so consult your pool professional. Algae in the pool can also cause this, so apply a heavy dose of chlorine or algicide as recommended by the pool manufacturer. Finally, the cartridge might need replacement.
  • L
    Linda HoltAug 15, 2025
    Why does my STA-RITE Posi Clear PXC95 Water Filtration Systems have a short cycle time?
    • S
      Stacy LeeAug 16, 2025
      A short cycle time can be caused by a few things. It might be that the chlorine residual is too low, so you should maintain the proper residual, consulting a pool professional for a recommendation. Another cause could be that the filter cartridge is dirty or plugged, so thoroughly clean the filter. The water may also be chemically out of balance, so consult a pool professional. If there's algae in the pool, apply a heavy dose of chlorine or algicide as recommended by the pool manufacturer. You may also need to replace the cartridge.
  • M
    Marc MartinAug 23, 2025
    How to fix low flow but high pressure in STA-RITE Water Filtration Systems?
    • M
      mitchellmarkAug 23, 2025
      Low flow with high pressure may be due to a plugged cartridge, so clean the filter thoroughly. Alternatively, a pipe blocked downstream from the filter could be the issue, so remove the obstruction. It's also possible the piping is too small; in that case, use a larger pipe, consulting a dealer for sizing.
  • D
    Dylan HooverNov 7, 2025
    What to do if my STA-RITE Posi Clear PXC95 cartridge is plugged?
    • W
      William PierceNov 7, 2025
      If your cartridge is plugged, it could be due to several reasons. You may not be cleaning it enough, so follow the cleaning instructions closely and clean thoroughly. The water might be chemically out of balance, so consult a pool professional. Excessive air in the filter can also cause this; vent air from the tank and check for pump suction pipe leaks, and clean the air bleed tube in the cartridge assembly. Your pool water may also contain iron; consult your pool professional. Heavy or improper application of powdered chlorine tablets using a binder can also cause the issue, so consult your pool professional. Algae in the pool can cause this, so apply a heavy dose of chlorine or algicide as recommended by the pool manufacturer. The use of incorrect chemicals with PHMB sanitizers can also ...

Summary

Safety Instructions

Safety Alert Symbol and Signal Words

Explains safety symbols and signal words like DANGER, WARNING, CAUTION, and NOTICE.

General Safety Precautions

Outlines critical safety precautions for filter operation, including pressure limits and air venting.

Installation and Start-Up

Pre-Start Safety Checks

Crucial pre-start safety checks including pump status and maximum pressure limits.

Posi-Ring Securing and Installation

Filter Maintenance Procedures

Pre-Disassembly Safety and Preparation

Essential steps before disassembling the filter, including stopping the pump and releasing pressure.

Filter Disassembly Steps

Detailed steps for safely removing the filter lid, O-ring, and inspecting for wear.

Safety Latch Replacement

Filter Assembly Steps

Guides on cleaning components, installing the cartridge, O-ring, and securing the Posi-Ring™.

Operational Procedures

Cartridge Cleaning Procedure

Details the process of cleaning the filter cartridge and when to replace it.

Winterizing Instructions

Repair Parts and Warranty

Sta-Rite Limited Warranty

Details the warranty terms, coverage, and limitations for Sta-Rite products.

STA-RITE Posi Clear PXC95 Specifications

General IconGeneral
ModelPXC95
TypeCartridge Filter
Flow Rate95 GPM
Max Working Pressure50 psi
Maximum Pressure50 psi
Effective Filtration Area95 sq ft
Filter Area95 sq ft
Cartridge TypePleated
Connection Size2 inches
Operating Pressure50 psi
Tank MaterialFiberglass
Cartridge MaterialPolyester

Related product manuals