Do you have a question about the STA-RITE Modular DE Filter PLDE36 and is the answer not in the manual?
Model | PLDE36 |
---|---|
Filter Type | Diatomaceous Earth (DE) |
Flow Rate | 36 GPM |
Filter Area | 36 sq. ft. |
Max Operating Pressure | 50 PSI |
Turnover (8 Hours) | 17, 280 gallons |
Diatomaceous Earth Required | 6 lbs |
Air Relief Valve | Yes |
Drain Plug | Yes |
Inlet/Outlet Size | 1.5 in. |
Waste Port Size | 1.5 in. |
Explains DANGER, WARNING, CAUTION, NOTICE terms used in the manual.
Covers risks of hazardous pressure and proper installation safety.
Explains when to clean the filter based on pressure rise.
Fields for recording filter details and startup pressure.
Illustrates filter dimensions and piping connections.
Details filter area, DE usage, flow rate, pressure, and temperature.
Covers proper mounting and positioning of the filter.
Details plumbing requirements, materials, and unions.
Recommends specific valves for operation and installation notes.
Emphasizes code compliance for electrical safety.
Step-by-step guide for starting the filter for the first time.
Criteria for cleaning based on pressure rise.
Step-by-step guide for performing a backwash cycle.
Detailed steps for taking apart and reassembling the filter module and tank.
Procedure for cleaning scale or oils using chemicals.
Lists recommended chemical cleaners for filter modules.
Instructions for washing the filter exterior.
Steps for checking skimmer, pump, and filter pressure.
Steps for preparing the filter for winter storage.
Lists parts with key numbers, descriptions, and quantities for models.
Addresses issues causing short cycle times.
Addresses issues of low flow and high pressure.
Addresses issues of low flow and low pressure.
Addresses issues related to a plugged filter module.
Addresses issues of the pool water not being clean.
Addresses issues when pool accessories stop working.
Details limited warranty periods for different product families.
Information and form for registering the product warranty.