Do you have a question about the STA-RITE PTM50 and is the answer not in the manual?
Model | PTM50 |
---|---|
Category | Water Filtration Systems |
Type | Cartridge Filter |
Flow Rate | 50 GPM |
Maximum Pressure | 50 PSI |
Inlet/Outlet Size | 2 inch |
Explains safety alert symbols, DANGER, WARNING, and CAUTION statements for hazard identification.
Lists items expected in the filter carton for initial verification.
Essential checks before pressure testing, including clamp and air release.
Warns against adjusting the clamp under pressure to prevent explosion and injury.
Covers pool cleaning, pH, clamp tightening, and pressure gauge maintenance.
Recommendations for initial cleaning and filter setup on a new pool.
Details filter mounting location, ventilation, drainage, and proximity to the pool.
Outlines requirements for piping materials, sealing, support, and electrical grounding.
Step-by-step guide to assembling the filter tank, element, and head.
Advises on connecting pipes, fittings, and potential issues like stress cracking.
Essential checks before starting, including clamp seating and air release valve operation.
Recording pressure gauge readings and checking for initial particle passage.
Critical safety warnings regarding pressure and component integrity before disassembly.
Detailed process for safely taking the filter apart, including clamp and O-ring inspection.
Instructions for washing the filter element using a garden hose.
Methods for removing stubborn deposits using chemical cleaners or detergents.
Precautions for chemical cleaning to prevent fire, explosion, and equipment damage.
How to attach and use the vacuum hose for normal pool cleaning.
Procedure for bypassing the filter to remove heavy dirt loads.
Instructions for using the auxiliary drain port to lower pool water level.
Steps for protecting the filter from freezing, including disassembly and storage.
Visual representation of filter components with key numbers.
Identifies specific parts needed for repair, listed by model.