To Next PageTo Next Page
Need help?Do you have a question about the STA-RITE S7MD72 and is the answer not in the manual?
General| Brand | STA-RITE |
|---|---|
| Model | S7MD72 |
| Category | Water Filtration Systems |
| Language | English |
Explains DANGER, WARNING, and CAUTION terms for hazard identification.
Warns about severe injury or property damage from tank blow-up due to pressure.
Warns about shock, burn, or death from hazardous voltage in pumps.
Discusses filter performance, DE amount, and pressure limits.
Provides recommendations for new pools and filter cleaning frequency.
Details requirements for filter placement, level surface, and piping materials.
Covers check valve installation, union connections, and electrical grounding.
Provides physical dimensions and installation space guidelines for the filter.
Lists approved DE types and filter performance specifications like flow rate and pressure.
Steps for preparing the precoat slurry and purging air from the system.
Recording pressure, and recommended cleaning after 48 hours for new pools.
Detailed steps for safely taking apart the filter tank and components.
Detailed steps for correctly reassembling the filter tank and components.
Step-by-step guide for performing a backwash to clean the filter.
When to clean the filter based on pressure increase and regular maintenance.
Instructions for washing and rinsing the filter module inside the tank and out.
Notes on PHMB cleaners, sunlight exposure, and inspecting the module.
Warnings and guidance for using chemicals to clean scale or oils from the module.
Steps for cleaning the module with chemicals and rinsing the tank.
How to wash the filter exterior and purge air.
Routine checks for debris, leaks, and pressure readings.
Instructions for cleaning the filter and draining water from the system.
Guidance on storing the filter module and protecting the unit from freezing.
Solutions for short cycle, low flow, high pressure, and plugged module problems.
Troubleshooting for cloudy water, iron, algae, and chemical imbalances.
Outlines general warranty policies, limitations, and exclusions for Sta-Rite products.
Details the warranty duration for specific product categories like filters, valves, and pumps.
