STA-RITE MAX-E-GLAS PE5E-125L User Manual

MAX-E-GLAS
™
CENTRIFUGAL PUMPS with TRAP
O W N E R’ S M A N U A L
INSTALLATION, OPERATION & PARTS
PE Series MODELS
H.P.
1/2 PE5C-120L PE6C-120L PE52C-120L
3/4 PE5D-124L PE6D-124L PE52D-124L
1 PE5E-125L PE6E-125L PE52E-125L
1-1/2 PE5F-126L PE6F-126L PE52F-126L
2 PE5G-122L PE6G-122L PE52G-122
3 PE6H-139L PE62H-139
3 PE6H-139LC PE6H3-139
Sta-Rite Pool/Spa Group
600 S. Jefferson Street, Waterford, WI 53185
North America: 800-752-0183, FAX 800-582-2217
International: 414-728-5551, FAX: 414-728-4461, TELEX: ITT 4970245
Oxnard, CA • Union City, TN • Delavan, WI • Waterford, WI
Printed in U.S.A. © 1996, Sta-Rite Industries, Inc. S71 (Rev. 12/6/96)
This manual should be furnished to
the end user of this pump; its use will
reduce service calls and chance of
injury and will lengthen pump life.

STA-RITE MAX-E-GLAS PE5E-125L Specifications

General

Model	PE5E-125L
Horsepower	1.25 HP
Voltage	115/230V
Phase	Single Phase
Warranty	1 Year
Type	Centrifugal
Port Size	2 inch
Motor Type	TEFC (Totally Enclosed Fan Cooled)

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Warnings

Summarizes critical safety alerts including danger, warning, and caution levels for user protection.

Pre-Pressure Test Safety Checks

Lists essential safety checks to perform before conducting pressure tests on the equipment.

INSTALLATION GUIDELINES

ELECTRICAL SYSTEM

Voltage Requirements and Checks

Grounding and Bonding Procedures

Outlines essential steps for grounding the motor and bonding the system for electrical safety.

Wiring and GFCI Installation

Details wiring requirements, circuit breaker sizing, and GFCI installation for safe pump operation.

PUMP OPERATION

General Operation Precautions

Priming the Pump Procedure

Explains the procedure for filling the pump and piping with water to ensure proper startup.

PUMP SERVICE AND DISASSEMBLY

Service Safety Precautions

Disassembly and Seal Removal

Outlines the process for taking apart the pump and removing the shaft seal for replacement.

PUMP REASSEMBLY AND SEAL REPLACEMENT

TROUBLESHOOTING GUIDE

Pump Failure: Suction Issues

Addresses common problems related to pump priming, suction leaks, and lift limitations.

Pump Failure: Clogged/Worn Parts

Electrical Troubleshooting