EasyManua.ls Logo

STA-RITE MAX-E-PRO User Manual

STA-RITE MAX-E-PRO
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MAX-E-PRO
TM
CENTRIFUGAL PUMPS
WITH INTEGRAL TRAP
O W N E R’ S M A N U A L
INSTALLATION, OPERATION & PARTS
Series P6E and P6RA
See Page 2 for Model Numbers
Sta-Rite Pool/Spa Group
293 Wright Street, Delavan, WI 53115
International: 262-728-5551, FAX: 262-728-7550
www.starite.com
Union City, TN • Delavan, WI • Mississauga, Ont. • Murrieta, CA
© 2003, Sta-Rite Industries, Inc. Printed in U.S.A. S691 (Rev. 10/30/03)
This manual should be furnished to
the end user of this pump; its use will
reduce service calls and chance of
injury and will lengthen pump life.

Other manuals for STA-RITE MAX-E-PRO

Question and Answer IconNeed help?

Do you have a question about the STA-RITE MAX-E-PRO and is the answer not in the manual?

STA-RITE MAX-E-PRO Specifications

General IconGeneral
ModelMax-E-Pro
Motor TypeTEFC (Totally Enclosed Fan Cooled)
Port Size2 inches
Connection Size2 inches
Voltage115/208-230V

Summary

Important Safety Instructions

General Safety Precautions

Follow basic safety precautions and warnings to prevent injury during operation.

Safety Checks Before Pressure Testing

Perform specific safety checks on clamps, lids, and air release before pressure testing.

Installation

Pool Pump Suction Requirements

Entrapment Protection

Ensuring pump suction systems protect users from entrapment hazards.

Electrical

Grounding and Bonding Procedures

Essential steps for grounding and bonding the pump motor for electrical safety.

Operation

General Operation Warnings

Warnings about running the pump dry and hazardous suction.

Priming Pump

Instructions for filling the pump with water to initiate operation.

Draining and Storage

Pump Service and Troubleshooting

Pump Disassembly/Removing Old Seal

Step-by-step guide for disassembling the pump to replace the shaft seal.

Pump Reassembly/Installing New Seal

Instructions for reassembling the pump and installing a new shaft seal.

Troubleshooting Guide

Common issues like failure to pump, capacity reduction, and noise with solutions.

Repair Parts List

Related product manuals