To Next PageTo Next Page
Need help?Do you have a question about the STA-RITE Max-E-Therm® and is the answer not in the manual?
General| Fuel Type | Natural Gas or Propane |
|---|---|
| Efficiency | 84% |
| Ignition | Direct Spark Ignition |
| Brand | STA-RITE |
| Model | Max-E-Therm® |
| Category | Swimming Pool Heater |
| Heat Exchanger Material | Cupro-nickel |
| BTU Rating | 200, 000 - 400, 000 BTU/hr |
| Controls | Digital |
| Water Flow Rate | 20-120 GPM |
| Operating Pressure | 50 PSI |
Safety warnings from the CPSC regarding hazardous elevated water temperatures.
General safety information and warnings for the Max-E-Therm pool heater.
Instructions for connecting the heater to a 120/240 VAC power supply.
Wiring diagram for the heater's internal electrical system.
Step-by-step guide for lighting and operating the heater.
Overview of safety devices like Air Flow Switch, Water Pressure Switch, and High Limits.
Explanation of control panel switches, indicator lights, and temperature display.
Preliminary checks and guidance for diagnosing heater issues.
Troubleshooting chart for heaters that do not fire, starting with LED checks.
Troubleshooting steps for heaters not firing, focusing on safety system checks.
Diagnostic flow for heaters that won't fire, examining blower and gas valve operation.
Troubleshooting steps for ignition issues, including igniter and gas pressure checks.
Interpreting diagnostic LED codes for specific safety switches and components.
Common burner symptoms, their causes, and recommended remedies.
Troubleshooting issues related to the heat exchanger, such as boiling or sweating.
