To Next PageTo Next Page
Need help?Do you have a question about the STA-RITE MAX-E-GLAS IITM and is the answer not in the manual?
General| Brand | STA-RITE |
|---|---|
| Model | MAX-E-GLAS IITM |
| Category | Water Pump |
| Language | English |
Detailed safety warnings, symbol definitions, and procedural instructions for safe operation.
Guidance on applying Teflon tape to threaded connections for pump assembly.
Specifications for suction and discharge piping, including size, support, and fitting selection.
Guidelines for safe and compliant suction system design and component selection.
Ensuring pump suction systems prevent entrapment or entanglement hazards.
Maintenance and certification requirements for suction outlet covers.
Procedures and standards for pump testing and component certification.
Instructions for properly grounding and bonding the pump motor and system components.
Guidelines for connecting the pump motor to the electrical supply, including GFCI requirements.
Steps to fill the pump and suction line with water to ensure proper operation.
Procedures for cleaning the strainer basket and general upkeep of the pump.
Instructions for safely draining water from the pump and piping system.
Procedures for preparing the pump for extended periods of non-use or freezing temperatures.
Step-by-step guide for taking apart the pump to access and remove the shaft seal.
Instructions for reassembling the pump and correctly installing a new shaft seal.
Diagnosing and resolving issues related to low capacity or discharge pressure.
Troubleshooting pump problems related to voltage, wiring, and motor performance.
Identifying and fixing mechanical issues causing strain, noise, or vibration.
