STA-RITE PE5D-181L User Manual

DURA-GLAS and MAX-E-GLAS
™
CENTRIFUGAL PUMPS with TRAP
O W N E R’ S M A N U A L
INSTALLATION, OPERATION & PARTS
Series
PE
PEA
P2R
P2RA
Sta-Rite Pool/Spa Group
293 Wright Street, Delavan, WI 53115
North America: 800-752-0183, FAX 800-582-2217
International: 262-728-5551, FAX: 262-728-4461, TELEX: ITT 4970245
www.sta-ritepool.com
Union City, TN • Delavan, WI • Mississauga, Ont. • Murrieta, CA
Printed in U.S.A. © 2001, Sta-Rite Industries, Inc. S413 (Rev. 4/9/01)
This manual should be furnished to
the end user of this pump; its use will
reduce service calls and chance of
injury and will lengthen pump life.
1917 0895 NF

STA-RITE PE5D-181L Specifications

General

Model	PE5D-181L
Horsepower	1.5 HP
Voltage	230V
Port Size	2 inches
Phase	Single Phase

Summary

Important Safety Instructions

General Warnings and Cautions

Covers injury risks, pool types, and supervision.

Safety Alert Symbol and Definitions

Installation and Operation Safety Rules

Covers system connections, drains, and air.

Read and Follow Safety Instructions

Pre-Pressure Test Safety Checks

Lists specific checks before pressure testing.

Installation Guidelines

Pump Mount Requirements

Details pump placement, ventilation, and stability.

Fire and Burn Hazard Warning

Pool Pump Suction Requirements

Entrapment Protection and Covers

Mandates protection against entrapment and cover maintenance.

Suction Outlet Configuration and Water Velocity

Multiple Outlet Requirements

Details using at least two drains spaced three feet apart.

Maximum Water Velocity Limits

Electrical Safety and Requirements

Electrical Warnings and Hazards

Covers voltage, shock, GFCI, and proper voltage matching.

Grounding and Bonding Procedures

Details motor grounding and pool structure bonding.

Motor Wiring and Connections

Terminal Board Connections

Wiring Installation Guidance

Explains permanent connection, GFCI, and circuit sizing.

Electrical Data and Wiring Requirements

Fusing and Wire Sizing Table

Provides data for single, two-speed, and three-phase models.

Pump Operation and Maintenance

Trap Cover Removal Procedures

Pump Priming Process

Pump Service and Disassembly

Pre-Service Safety Checks

Removing the Old Shaft Seal

Detailed steps for pump disassembly.

Pump Reassembly and Seal Installation

Installing New Ceramic Seat

Installing New Rotating Seal

Final Assembly and Reassembly

Pump Troubleshooting Guide

Troubleshooting No Pumping/Low Pressure

Addresses suction leaks, clogs, and electrical issues.

Troubleshooting Mechanical Issues and Noise