To Next PageTo Next Page
Need help?Do you have a question about the STA-RITE DURA-GLAS PE Series and is the answer not in the manual?
General| Dimensions | Varies by model |
|---|---|
| Weight | Varies by model |
| Motor Type | TEFC (Totally Enclosed Fan Cooled) |
| Type | Centrifugal Pump |
| Phase | Single Phase |
| Port Size | 1.5 or 2 inch |
| Inlet/Outlet Size | 1.5 or 2 inch |
Provides critical warnings, cautions, and safety alerts for pump operation and user protection.
Lists essential safety steps and checks to perform before conducting pressure tests on the system.
Details location, ventilation, stability, and foundation requirements for mounting the pump securely.
Specifies pipe sizing, support, and slope requirements for efficient pump operation and airlock prevention.
Outlines safety measures for suction outlets to prevent entrapment and ensure compliance with standards.
Instructions for properly grounding the motor and bonding the pump to the pool structure for electrical safety.
Provides diagrams and guidance for connecting single-speed, dual-voltage, and two-speed motors to the power supply.
Lists crucial safety steps to take before accessing or removing the pump's trap cover.
Explains the process of filling the pump with water to prepare it for operation, including troubleshooting.
Details periodic checks and cleaning needed for the pump, primarily focusing on the trap basket.
Step-by-step instructions for draining water from the pump and tank to prevent freezing.
Guidelines for protecting the pump during off-season or freezing temperatures, including antifreeze use.
Essential safety precautions and checks to perform before starting any pump maintenance or repair.
Instructions for taking apart the pump to access and remove the shaft seal.
Detailed steps for installing a new shaft seal and reassembling the pump components correctly.
Addresses common issues like failure to pump, reduced capacity, and lost prime with possible causes and solutions.
Guides users on diagnosing electrical problems such as slow operation or overheating, checking voltage and connections.
Covers mechanical issues like improper mounting, noise, and piping support, offering solutions for optimal performance.
Lists part numbers and descriptions for 5" and 6" trap assemblies and strainer baskets.
Details available kits for comprehensive pump overhauls and seal replacements.
Lists specific motor, impeller, and diffuser part numbers for single-speed pump models.
Details part numbers for two-speed and three-phase pump configurations.
Outlines the terms, duration, and conditions for Sta-Rite's product warranties, including prorated coverage.
Explains how to obtain warranty service and lists circumstances under which the warranty may be voided.
