Do you have a question about the STA-RITE MPRA6G-155L and is the answer not in the manual?
Model | MPRA6G-155L |
---|---|
Horsepower | 1.5 HP |
Voltage | 115/230V |
Max Flow Rate | 155 GPM |
Impeller Material | Thermoplastic |
Housing Material | Cast Iron |
Speed | 3450 RPM |
Material | Cast Iron |
Phase | 1-Phase |
Discharge Size | 2 inches |
Inlet Size | 2 inches |
Outlet Size | 2 inches |
Motor Type | TEFC |
Warranty | 1 Year Limited |
Port Size | 2 inches NPT |
General safety precautions for using the equipment, including specific warnings.
Ensuring pump suction systems prevent entrapment and hair entanglement hazards.
Crucial electrical safety guidelines including grounding, voltage matching, and GFCI usage.
Instructions for safely grounding and bonding the motor and system components.
Steps to prime the pump, including filling the trap and ensuring proper water levels.
Detailed steps for disassembling the pump and replacing the shaft seal.