EasyManua.ls Logo

STA-RITE DYNA-PRO MPE6D-205L User Manual

STA-RITE DYNA-PRO MPE6D-205L
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DYNA-PRO
®
CENTRIFUGAL PUMPS
WITH INTEGRAL TRAP
O W N E R’ S M A N U A L
INSTALLATION, OPERATION & PARTS
Series MPRA, MPEA, and MPE
See Page 2 for Model Numbers
This manual should be furnished to the owner of the pump.
(Unions optional)
© 2014 Pentair Water Pool and Spa, Inc. All rights reserved.
1620 Hawkins Ave., Sanford, NC 27330 (919) 566-8000
10951 West Los Angeles Ave., Moorpark, CA 93021 (805) 553-5000
Dyna-Pro® and Sta-Rite® are trademarks and/or registered trademarks of Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the United States
and/or other countries. Unless noted, names and brands of others that may be used in this document are not
used to indicate an affiliation or
endorsement between the proprietors of these names and brands and Pentair Aquatic Systems. Those names and brands may be the trademarks or
registered trademarks of those parties or others.
S771 Rev C 5/16/14
Question and Answer IconNeed help?

Do you have a question about the STA-RITE DYNA-PRO MPE6D-205L and is the answer not in the manual?

STA-RITE DYNA-PRO MPE6D-205L Specifications

General IconGeneral
BrandSTA-RITE
ModelDYNA-PRO MPE6D-205L
CategoryWater Pump
LanguageEnglish

Summary

Pool Pump Safety Instructions

Critical Safety Warnings & Entrapment Hazards

Covers critical warnings regarding injury, death, and suction entrapment hazards.

Hazardous Pressure & Electrical Safety

Warnings regarding hazardous pressure during start-up and general electrical safety.

Pump Installation Guidelines

Suction Requirements & Entrapment Prevention

Guidelines for suction system installation to prevent entrapment hazards.

Pump Mounting, Piping & Safety Precautions

Guidance on pump placement, securing, piping, and essential installation safety advice.

Electrical Setup and Wiring

Grounding, Bonding, and Voltage Matching

Instructions for safe electrical grounding, bonding, and matching supply voltage.

Wiring Configurations and Recommendations

Guidance on pump wiring for various voltage and speed configurations.

Operation, Maintenance, and Winterizing

Pump Operation and Priming Procedures

Key operational advice including priming, avoiding dry running, and trap cover removal.

Routine Maintenance and Storage

Steps for cleaning the strainer basket, inspecting O-rings, and preparing for storage.

Pump Draining and Winterized Startup

Procedures for draining the pump and preparing winterized equipment for use.

Troubleshooting and Parts

Troubleshooting Common Pump Issues

Solutions for common pump problems like failure to pump, low capacity, or noise.

Dyna-Pro® Pump Repair Parts List

Comprehensive list of replaceable parts for Dyna-Pro® pool pumps.

Related product manuals