Stabila LD 500 User Manual

Operating instructions
GB
Laser Distancer LD 500

Stabila LD 500 Specifications

General

Protection Class	IP 54
Laser Type	635 nm, < 1 mW
Batteries Included	Yes
Operating Temperature	-10 °C to +50 °C
Laser Class	Class 2
Battery Type	2 x AA

Summary

Safety Instructions

Symbols Used

Explains the meaning of warning and caution symbols used in the manual for hazard identification.

Use of the Instrument

Details permitted and prohibited uses of the device, emphasizing correct and efficient operation.

Start-up

Inserting/Replacing Batteries

Instructions on how to insert or replace batteries in the device, ensuring correct polarity.

Keypad and Display

Keypad

Identifies and explains the function of each button on the device's keypad.

Operation

Switching On and Off

Instructions for powering the instrument on and off, including automatic switch-off.

Measuring

Single Distance Measurement

Step-by-step guide for performing a single distance measurement and displaying the result.

Minimum/Maximum Measurement

How to measure minimum or maximum distances and determine spacings.

Advanced Measurement Techniques

Tilt Measurement

Direct Horizontal Distance

Indirect Measurement

Distance via 2 Auxiliary Measurements

Distance via 3 Auxiliary Measurements

Appendix

Message Codes

Lists error codes, their causes, and remedies for troubleshooting.

Technical Data

Measurement Specifications