EasyManua.ls Logo

Stack-On E-24-MG-C-S - Selecting a Location

Stack-On E-24-MG-C-S
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HOW TO LOCK
1. Close the door.
2. Turn the handle to the locked position.
3. Turn the dial either direction a few rounds.
1st
70
50
30
3 times twice once
2nd
3rd
Example: If the dial combination numbers were 70 - 50 - 30
1. Turn the Dial clockwise passing the rst
combination number twice landing on the
number the third time.
2. Now turn the Dial counterclockwise, passing the
second combination number once landing on
the number on the next time around.
3. Turn the Dial clockwise until you reach the third
combination number.
4. e handle should now be released. Turn the
handle clockwise. Pull the door towards you.
All numbers must be dialed exactly. If you pass a
number, you can not back up. You must start over.
All numbers are to be dialed to the Top Notch located
on top of the dial ring (the 12 o'clock position).
Your Combination Number
1st
3 times (R)
2nd
2 times (L)
3rd
1 time (R)
SAFE COMBINATION INSTRUCTIONS
e safe should be at against the wall and oor.
Remove the baseboard if necessary.
SELECTING A LOCATION
e safe must be mounted to the oor. For
optimal safety and security, the safe should be
installed adjacent to a side wall with minimal
space on either side of the safe, in an isolated,
dry and secure area.
CHILDREN SHOULD NOT PLAY
WITH OR AROUND THE SAFE AT
ANY TIME.
40250-2203
2
15

Related product manuals