Stack-On QAS-1845-E - User Manual

40786-1803
1
12
Your Electronic Safe Combination:
Serial #:
Instructions
QAS-1845-E
QAS-1812-E
IMPORTANT
GETTING STARTED
NOTE: You can store your Key #, Serial # and
Combination on Stack-On’s SECURE website
– stackon.com under Customer Service.
Storing your Key # or Combination will provide
instant access to this important information should
you ever lose your keys or your combination.
Only you will have access to this information.
SAFE FEATURES
1. Key Lock
2. Combinaon Buons
3. Baery Compartment (inside safe)
4. LED Light (inside safe)
Record the serial number from the tag on the
door front.
Record your combinaon.
Keep keys and combinaon in a secure place
away from children.
DO NOT STORE YOUR KEYS OR COMBINATION
INSIDE THE SAFE.
When you first receive your safe you will need
to open the door with the key to install the
baeries. Baeries are included and are
located inside the safe.
NOTE: The key has also been provided in case
you lose or forget your security code or the
baeries run low. If you lose your key, you may
purchase a replacement key by referencing the
serial number located on the front of the door.
See secon regarding replacement keys for
further informaon.
To open the safe, insert key into lock and turn
clockwise unl the door automacally opens.
NOTE: You must turn the key back to the
locked posion before you are able to close
and lock the door.
(4) M6 x 20 mm (3/4” long) Screws
(4) Washers
Drill
Flat Head Screwdriver
10 mm Wrench
3/16" (5 mm) drill bit for drilling into wood
HARDWARE INCLUDED:
TOOLS REQUIRED:
Battery Disposal
Please dispose the used batteries
per municipal or provincial law.
5. Reset Buon (inside safe)
®
5

Summary

Safe Features

Getting Started with Safe Operation

Instructions for initial safe opening using the key and installing batteries.

Installing and Programming Batteries

Battery Compartment Installation

Details on accessing the battery compartment and installing AA batteries, including cover replacement.

Initiating Combination Programming

Steps to begin programming a new electronic combination, including pressing the reset button.

Entering the New Combination

How to enter a 3-8 button combination using the safe's buttons and confirmation feedback.

Recording the New Combination

Final step to record the new combination by pressing the reset button after entry.

Operating the Safe

Unlocking the Safe Using Combination

Instructions for entering the correct combination to open the safe, including button feedback.

Incorrect Code Entry and Lockout

Details on lockout procedures and warnings for multiple incorrect combination entries.

Keypad Sound Control

How to turn the keypad's auditory feedback (beeps) on or off using button combinations.

Internal LED Light Functionality

Explanation of the internal LED light activation upon correct combination entry.

Safe Placement and Security

Choosing a Safe Location

Guidance on selecting an optimal, secure, isolated, and dry location for safe installation.

Mounting and Securing the Safe

Instructions for securing the safe to a shelf or floor using provided hardware and predrilled holes.

Replacement Key;Combination

Requesting Replacement Devices

Process for obtaining replacement keys, combinations, or RFID devices, including website instructions.

Limited Warranty Information

Three-Year Steel Safe Warranty

Details on the three-year limited warranty for steel safes, covering defects in material and workmanship.

Stack-On QAS-1845-E Specifications

General

Brand	Stack-On
Model	QAS-1845-E
Category	Safes
Language	English