40287-1307
1
18
Serial #:
®
Instructions
Model No. QAS-450-B
CONTROL FEATURES
1. Key lock
2. START button
3. Fingerprint scanner
4. Red indicator light
5. Green indicator light
6. Reset button (inside safe)
7. Battery Compartment (inside safe)
When you rst receive your safe you will need to open
the door with the key in order to install the baeries.
Baeries are included and are located inside the safe.
To open the safe, insert key into lock and turn
clockwise until the door automatically opens.
NOTE: You must turn the key back to the locked
position before you are able to close and lock the
door.
NOTE: is key has also been provided if the
baeries run low. If you lose your key, you may
purchase a replacement key by referencing the serial
number located on the front of the door. See section
regarding replacement keys for further information.
NOTE: You can store your Key # and your
Serial # information on Stack-On’s SECURE
web site – www.stack-on.com under Service.
Storing your Key # will provide instant access to
this important information, should you ever lose
your keys or need the number to order a new
set.
Only you will have access to this information.
GETTING STARTED
IMPORTANT
Record the serial number from the tag on the door front.
Keep keys in a secure place away from children.
DO NOT STORE YOUR KEYS INSIDE THE SAFE.
Tools Required:
Drill
Flat Head Screwdriver
10 mm Wrench
3/16” (5 mm) drill bit for drilling into wood
Hardware Included:
(4) M6 x 20 mm (3/4” long) Screws
(4) Washers
To Next Page
Need help?
General