Stack-On GCB-18C User Manual

21
1
40112-1309
Record the key number and serial number from the back of the cabinet.
Keep keys in a secure place away from children.
Do not store this document in the cabinet
Portable Case
Instructions
GCB-18C
PARTS INCLUDED
PARTS INCLUDED
Serial #:
Key #:
WARNING
Tip Over Hazard
A child or adult can tip the cabinet and be killed or
seriously injured.
Failure to secure the cabinet as shown in these
instructions can result in death or serious injury to
children and adults.
Children should not play with or around the
cabinet at any time.
NOTE: You can store your Key # and your Serial # information on
Stack-On’s SECURE web site – www.stack-on.com under Service.
Storing your Key # will provide instant access to this important
information, should you ever lose your keys or need the number to
order a new set.
Only you will have access to this information.
R
IMPORTANT:
Tools Required:
Phillips screwdriver
7/16” wrench
drill
3/16” drill bit
Scizzors
Hardware included:
(22) 8-32 x 1/2 machine screw
(22) 8-32 nut
(12) 8 x 1/2 screw
(4) 1/4 x 1-1/2 lag screw
(4) washers
PLASTIC PLUG
(QUANTITY 2)
FOAM PAD FOR BOTTOM
(QUANTITY 1)
FOAM FOR SHELF
(QUANTITY 4)
FOAM FOR TOP SHELF
(QUANTITY 1)
SHELF
(QUANTITY 4)
TOP SHELF
(QUANTITY 1)
CENTER PARTITION
(QUANTITY 1)
SCOPE REST
(QUANTITY 4)
5-POSITION BARREL REST
(QUANTITY 2)
4-POSITION BARREL REST
(QUANTITY 2)
PLANNING YOUR CABINET CONFIGURATION
Before assembling your cabinet, review the following storage options
this cabinet provides. Choose the options that best suit your storage
needs.
You will need to assemble all internal components before mounting the
cabinet to the wall and oor.
e partition and the top
shelf create the structure
for the le and right
storage compartments in
this cabinet. e space
behind the top shelf
provides clearance for
longer gun barrels.

Stack-On GCB-18C Specifications

General

Brand	Stack-On
Model	GCB-18C
Category	Safes
Language	English

Summary

Product Safety and Information

Safety Warning: Tip Over Hazard

Warning about potential tipping hazard and risk of death or serious injury if not secured.

Key and Serial Number Recording

Instructions to record key and serial numbers online for future access and reference.

Important Notes on Keys and Documentation

Guidance on recording key/serial numbers, keeping keys secure, and not storing the document in the cabinet.

Parts and Configuration Planning

Parts Included in the Kit

Lists all components and hardware provided for cabinet assembly.

Cabinet Configuration Planning

Guidance on choosing storage options and assembling internal components before wall mounting.

Installation of Barrel Rests

Instructions for installing the 4-position and 5-position barrel rests inside the cabinet.

Cabinet Assembly Procedures

Center Partition Assembly

Details on positioning and securing the vertical center partition for cabinet structure.

Top Shelf Assembly

Instructions for attaching the top shelf to the center partition and cabinet sides.

Shelf Assembly

Guidance on selecting locations and assembling adjustable shelves within the cabinet.

Side By Side Shelf Assembly

Steps for assembling two shelves at the same height through the center partition.

Installation and Final Touches

Securing the Cabinet

Instructions for securely mounting the cabinet to wall studs and the floor.

Selecting a Location

Guidelines for choosing an optimal, safe, and secure location for cabinet installation.

Foam Installation

Instructions for placing foam pads on shelves and the cabinet bottom.

Installation of Scope Stand-Off

Guidance on screwing scope stand-offs into barrel rest pilot holes as needed.

Product Support and Warranty

Key Request Process

Procedure and form for requesting replacement keys, including required documentation.

Limited One Year Warranty

Details of the one-year warranty, coverage, exclusions, and customer service contact.