Stack-On QAS-1514-B User Manual

Serial #:
®
Instructions
QAS-1514-B
NOTE: You can store your Key # and Serial # on Stack-On’s
SECURE web site – www.stack-on.com under Customer
Service.
Storing your Key # will provide instant access to this
important information should you ever lose your keys.
Only you will have access to this information.
CONTROL FEATURES
1. Key lock
2. Biometric Key pad
3. Reset button (inside safe)
4. Battery Compartment (inside safe)
• Record the serial number from the tag on the
door front.
• Keep keys and in a secure place away from
children.
• DO NOT STORE YOUR KEYS INSIDE THE
SAFE.
Tools Required:
Drill
10 mm Wrench
3/16” (5 mm) drill bit for drilling into wood
Hardware Included:
(6) Lag screws ᴓ 6mm X 48 MM Legnth
(6) Washers
(6) Plastic anchors
40667-1512
1
15
1
2
3
4
IMPORTANT

Stack-On QAS-1514-B Specifications

General

Brand	Stack-On
Model	QAS-1514-B
Category	Safes
Language	English

Summary

Important Information and Control Features

Important Safety Notes

Key advice on recording serial numbers, keeping keys safe, and not storing keys inside the safe.

Control Features Overview

Lists the main control features including key lock, biometric keypad, reset button, and battery compartment.

Getting Started and Battery Installation

Getting Started: Initial Setup

Initial steps for users, including opening the safe and accessing the holster compartment.

Battery Installation Guide

Guide on how to install 4 AAA alkaline batteries and indicators for low battery.

Fingerprint Management and Safe Closing

Recording Fingerprints

Step-by-step guide to recording up to 20 fingerprints for secure access.

Closing the Safe

Instructions on how to properly close and secure the holster compartment.

Safe Operation and System Management

Opening the Safe Using Fingerprint

Explains fingerprint scanner use, success/failure indicators, and lockout procedures.

Clearing Memory

Procedure to erase all stored fingerprint data using the reset button.

Removing Safe from Mounting Bracket

Step-by-step instructions for detaching the safe from its installed mounting bracket.

Sound Control

Instructions for turning the safe's operational beeps on or off.

Installation, Mounting, and Maintenance

Selecting a Mounting Location

Guidance on choosing a suitable, secure location for mounting the safe.

Securing the Safe

Instructions for attaching the mounting bracket and securing the safe to it.

Scanner Maintenance

Recommended method for cleaning the biometric scanner for optimal performance.

Key Management

Advice on keeping keys secure and recording the serial number for future reference.

Key Request Process

Service: Key Replacement

Outlines required steps and documentation for ordering a replacement key.

Limited Three Year Warranty

Steel Safes Warranty Terms

Details warranty coverage, exclusions, and claims procedure for steel safes.