Stack-On QAS-1000 User Manual

Personal Safe
Instructions
CONTROL FEATURES
1. Key lock
2. Red indicator light
3. Green indicator light
4. Combination buttons
5. Reset button (inside safe)
6. Battery Compartment (inside safe)
Record the serial number from the tag on the door front.
Record your combination number.
Keep keys in a secure place away from children.
DO NOT store keys or your combination in the safe.
Serial #:
Your Combination #:
GETTING STARTED
When you first receive your safe you will need to open the door with the key in order to install the batteries. Batteries are
included and are located inside the safe.
INSTALLING THE BATTERIES
Remove the shelf for better access to the battery compartment. Push the battery cover locking tab with a screwdriver to release the cover.
Install the (4) AA alkaline batteries as shown. Replace the cover by inserting the rear tabs in the slots and snapping the cover in place.
NOTE: If the batteries are low the red light will go on while the safe
is opening. Replace with 4 new AA alkaline batteries as shown.
NOTE: This key has also been provided in case you lose or forget your security code or the batteries run low. If you lose your key,
you may purchase a replacement key by referencing the serial number located on the front of the door. See section regarding
replacement keys for further information.
To open the safe, insert key into lock and turn clockwise until the door automatically opens. NOTE: You must turn the key back to
the locked position before you are able to close and lock the door.
40261-1101
12
1

Stack-On QAS-1000 Specifications

General

Brand	Stack-On
Model	QAS-1000
Category	Safes
Language	English

Summary

Control Features Overview

Key Lock

Identifies the primary locking mechanism of the safe.

Indicator Lights

Describes the function of the red and green status lights.

Combination Buttons

Refers to the input buttons for the electronic lock.

Reset and Battery Access

Details the location of the reset button and battery compartment.

Getting Started

Initial Safe Operation

Explains how to open the safe for the first time using the provided key.

Installing the Batteries

Battery Replacement Procedure

Outlines the steps for accessing and installing batteries in the safe.

Programming Your Own Electronic Combination

Setting a New Combination

Guides users through programming a custom 3-8 button combination for the safe.

Opening the Safe Using Your Combination

Combination Entry and Lockout

Explains how to enter the combination and details the lockout feature after incorrect attempts.

Selecting a Location

Safe Placement Guidelines

Provides recommendations for choosing a suitable, secure location for the safe.

Securing the Safe

Mounting the Safe

Details the process of securely fastening the safe to a solid surface.

Important Information

Combination and Key Security

Emphasizes secure storage of combinations and keys, and ordering replacements.

Key Request

Replacement Key Procedure

Outlines the steps and required documentation for requesting replacement keys.

Limited Three Year Warranty