Stack-On QAS-1845-E - Safe Placement and Security; Choosing a Safe Location; Mounting and Securing the Safe

40786-1803
4
12
The safe must be mounted to a shelf or floor .
For opmal safety and security, the safe should
be installed in an isolated, dry and secure area.
SECURING THE SAFE
SELECTING A LOCATION
IMPORTANT
Keep keys and your combinaon number in a
secure place, away from children. Keep this
record of your serial number and combinaon
in a secure place separate from your safe. To
order a replacement key set, follow the
instrucons on the aached form.
NOTE: This safe must be mounted to a
shelf
or floor . Failure to do so will compromise the
safety and security of the safe.
NOTE ON LOCKING THE SAFE: The safe needs to
be in an upright posion, as shown in figure 1,
for the locking mechanism to funcon properly.
Failure to mount the safe in the corrrect
upright posion will compromise the safety
and security of the safe.
Secure the safe to a shelf or floor using the
predrilled mounng holes in the safe and
hardware provided.
Place the safe in the desired locaon and mark
the mounng holes to be used with a pencil.
Move the safe and drill the pilot holes for the
screws. For mounng to a shelf, drill 3/16"
diameter pilot holes and aach the safe using
the 3/4" screws and washers. (Figure 2)
FIGURE 1
THE SAFE SHOULD ALWAYS BE KEPT OUT
OF THE REACH OF CHILDREN.
FIGURE 2
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
© 2018
STACK-ON PRODUCTS