EasyManua.ls Logo

STACYC 12EDRIVE - Pre-Ride Inspection; Inspection Checklist

STACYC 12EDRIVE
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P a g e | 11
PRE-RIDE INSPECTION & CHECKLIST:
Never ride your cycle on public streets, roads, highways, at night or when visibility
is limited. Inspect cycle for damage. Do not ride a damaged cycle.
Power Switch: Ensure the Power switch is in the “OFF” posion during the Pre-Ride
Inspecon and remains “OFF” unl the rider is sing on the saddle, both hands grip-
ping the handle bars, both feet at on the ground.
Throle: Ensure the baery is removed and the power switch is in the “OFF” posi-
on. Ensure there are no cracks or visible damage. Check that the throle rotates
freely and the return spring returns the throle back to the “ZERO” posion from the
“FULL. If the throle does not rotate freely and automacally return back to “ZERO”
when released, contact an authorized repair center before using the cycle.
Brake: Check brake for proper funcon. When you squeeze lever, brake should
provide posive braking acon. Make sure that brake is not rubbing when lever is
released. Adjust as required prior to use. See “Brake Adjustment” below.
Side Panels and Chain Guard: Verify side panels and chain guard are properly in-
stalled.
Tires: Periodically inspect res for excess wear and aging. Regularly check re pres-
sure and inate as per re sidewall.
Frame, Fork, Stem and Handlebars: Check for cracks and loose hardware. Broken
components are rare, however it is possible for a reckless rider to run into a curb or
object and cause damage. Get into the regular habit of inspecng your cycle every
me you ride it!
Hardware/Loose Parts: Check all hardware, such as nuts, bolts, cables, fasteners, etc.
to ensure they are secure. There should not be any unusual rales or sounds from
loose parts or broken components. If the unit is damaged, do not ride it. Safety Gear:
Check that proper protecve gear, such as an approved and properly ed safety
helmet, eye-wear, athlec shoes (closed toe shoes with rubber soles), elbow pads,
kneepads, etc., are in place prior to riding. Keep shoelaces ed and out of the way of
the wheels, motor and drive system. NEVER RIDE BAREFOOTED OR IN SANDALS.
Laws and Regulaons: Check and obey any local laws or regulaons prior to riding.
Insurance: Verify with your insurance company that your exisng insurance policies
provide necessary coverage for cycle use.

Related product manuals