Stage6 S6 User Manual

S6
INSTRUCTIONS
PRECISION REV COUNTER
EN
4.2 Resetting the max record
4.3 Setting Up the Rev Counter
In the main screen, press and hold the button for 3 seconds to enter set-up mode. You can switch between
the di󰀨erent set-up screens (ADJ 1 to ADJ 8) by pressing the button briey. In order to enter the respective
screen, simply press and hold the button for 3 seconds.
When ADJ 1 appears on the screen, press and hold the button for 3 seconds to enter the ADJ 1 set-up screen.
Press the button once to change the stroke setting.
E.g.: The setting is changed from 2C (two-stroke) to 4C (four-stroke).
NOTE
You can select 2C (two-stroke) or
4C (four-stroke).
CAUTION!
Be sure to enter the correct stroke and cylinder numbers.
If the input is incorrect, the RPM output will be incorrect, too.
Engines that ignite every 360° are dened as two-stroke and engines that ignite every 720° are dened as four-stroke.
Four-stroke engines with one cylinder that ignite every 360° will have to be treated just like two-stroke engines with one
cylinder.
In the max record screen, press and hold the
button for 3 seconds to reset the record.
The stroke is
ashing.
22

Stage6 S6 Specifications

General

Brand	Stage6
Model	S6
Category	Measuring Instruments
Language	English