Stagg HEAD BANGER 10 - Display Inversion and Self-Test; Runtime Display and Reset Function; DMX Channel Functions (7-Channel Mode)

!
DISP - Display Inversion
• Press MENU, then UP or DOWN until "DISP" is displayed, then press ENTER
• By pressing ENTER, the unit's display can be inverted so that when the light
is hung upside-down, the display will still be properly readable by the user.
TEST - Self-Te st
• Press MENU, then UP or DOWN until "TEST" is displayed, then press ENTER
• The unit will run a self-test program, testing all the features individually.
Press MENU to exit.
HOUR - Runtime
• Press MENU, then UP or DOWN until "HOUR" is displayed, then press ENTER
• The total running time of the unit is displayed, press MENU to exit.
RSET - Reset
• Press MENU, then UP or DOWN until "SLav" is displayed, then press ENTER
• The current software version is displayed, press MENU to exit.
DMX Channels
7 Channels Mode
CHANNEL
VALUE
FUNCTION
1
0
Stop
1~255
Adjust Pan
2
0
Stop
1~255
Adjust Tilt
3
0~200
Dimm er
201-255
Strobe
4
0
Close
1~255
Red
5
0
Close
1~255
Green
6
0
Close
1~255
Blue
7
0
Close
1~255
White