Need help?Do you have a question about the Stagg HEAD BANGER 10 and is the answer not in the manual?
Lists package contents and provides unpacking instructions for the fixture.
Briefly describes the fixture's operating modes and important safety warnings.
Details technical specifications and key functional features of the HeadBanger 10.
Outlines necessary conditions and precautions for safe and proper installation of the fixture.
Explains power supply connection, voltage compatibility, and daisy-chaining limits.
Details serial DMX data connections between fixtures and the use of terminators.
Presents the control panel menu structure and identifies key functions.
Explains how changes are saved and the unit displays its active running mode.
Guides on setting the DMX address and selecting the DMX channel mode.
Details master/slave configurations and how to adjust the sound sensitivity.
Covers the setup for automatic programs and the unit's standby mode behavior.
Explains pan/tilt inversion settings and options for the display LED.
Describes display inversion for upside-down mounting and how to perform a self-test.
Explains how to view total runtime and reset the unit to factory defaults.
Details the functions assigned to each DMX channel in the 7-channel configuration.
Details the functions assigned to each DMX channel in the 12-channel configuration.
Lists critical warnings regarding electrical shock, heat, and proper handling to prevent hazards.
Explains CE, WEEE, and RoHS compliance markings and their significance for the product.
General| Type | Moving Head |
|---|---|
| Light Source | LED |
| Pan | 540° |
| Tilt | 270° |
| Beam Angle | 25° |
| Frequency | 50/60Hz |
| IP Rating | IP20 |
| Control | DMX512, Master/Slave, Auto, Sound |
| Input Voltage | AC 100-240V |
To Next Page
