This is a user manual for the Battery Speaker. It contains important safety information as well as
the instructions required for the intended use of the device. Please read it carefully before use.
Please note that the design and the technical specications of the device are subject to change
without any prior notice. Check the website for updates.
SAFETY INSTRUCTIONS
• Thank you for purchasing this product. It has been thoroughly tested and has been shipped in
perfect operating condition.
• Before using the product, carefully check the packaging for damage. If the packaging is
damaged, carefully inspect the device, the power cable and the plugs and make sure they are
intact. If they are damaged, please contact your vendor or call our customer support number.
The whole cable should be replaced if it is damaged or if the plug is damaged. Do not repair or
modify the mains power cable.
Do not open the cabinet. Leave all servicing to qualied personnel.
• Attention before connecting your amplier to a mains AC outlet! This amplier can be powered by
110-120V AC 60Hz or 220-250V AC 50Hz. The fuse cover plate acts as switch The orientation of
the plate is important! Make sure that your local voltage corresponds with the voltage indication
above the arrow.
(see image). If it is not, turn the plate and use the appropriate fuse. (115V: F 2,5A or 230V: F1,6A)
Always unplug the power cable before turning the plate and /or changing the fuse.
• When this active speaker system is connected to a mains (AC) outlet, it must be earthed to
operate safely.It can also work autonomously using its build in battery as soon as it is sufciently
charged.
When the unit is powered from mains the internal battery will be charged automatically.
• Only use the device in a dry location. Do not operate the device if the ambient temperature or
humidity is too high.
• Do not spill or splash liquids on the amplier. Should this happen, unplug the power cable from
the mains outlet and switch off the powered speaker immediately.
To Next Page
Loading...
