Servicing
12
Ammeter Version 8403/2 and 8405/2
11 Servicing
Work on the ammeters may only be carried out by appropriately authorized and trained
personnel.
Before any work commences, the ammeters must be disconnected from the supply.
The ammeters must not be opened. They can only be repaired by the manufacturer!
Observe the relevant national regulations in the country of use!
11.1 Maintenance
The following points must be checked during maintenance:
• clamping screw holding the cable is securely seated.
• plastic enclosures for formation of cracks.
• compliance with permitted temperatures (to EN 50014).
11.2 Accessories and spare parts
Use only original accessories and spare parts made by R. STAHL Schaltgeräte GmbH.
Use of another company's accessories and spare parts invalidates the device and acces-
sory warranty of R. STAHL Schaltgeräte GmbH.
12 Transport and storage
• Transport and storage are only permitted in the original packing.
13 Disposal
Observe the national standards for refuse disposal.
Accessory Description Order number
Type 8040 Fixing plate for snap-on fixing type 8405
80 408 05 29 0
Type 8603/1 Bezel for type 8405 88 000 07 40 7
Type 8603/2 Bezel for type 8403
88 000 01 45 7
Scale plates will be supplied on request
Table 11-1: Accessories
To Next Page
