Need help?Do you have a question about the Stahl ST30 and is the answer not in the manual?
General| Brand | Stahl |
|---|---|
| Model | ST30 |
| Category | Chain Hoists |
| Language | English |
Guidelines for qualified personnel performing installation, commissioning, maintenance, and repairs.
Requirements for annual inspections and periodic tests by qualified persons.
Specifies the intended applications and restrictions for chain hoists.
Lists prohibited uses and actions to avoid for safe operation.
Identifies potential residual hazards and preventative safety measures.
Outlines user responsibilities for personnel and work safety.
Lists required personal protective equipment for users.
Guidelines for safe and conscious operation of the hoist.
Procedures and safety rules for attaching loads to the hoist.
Instructions for installing a stationary chain hoist.
Step-by-step guide to assembling the trolley for the chain hoist.
Procedure to adjust the trolley to match the runway width.
Instructions for mounting the trolley onto the chain hoist.
Steps for attaching the trolley assembly to the runway beam.
Electrical connection procedures to the mains power supply.
Importance and connection of the protective earth conductor for safety.
Procedures for initial commissioning and testing of the chain hoist.
Responsibilities and safety duties of the crane operator.
Explanation of the control pendant functions and operation.
Procedures for using and resetting the emergency stop function.
Overview of inspection and maintenance requirements for operational reliability.
Schedule for daily, monthly, quarterly, annual, and five-yearly inspections.
Procedure to check the slipping clutch's function without a load.
Steps for adjusting the slipping clutch without applying a load.
Requirements for mains voltage, cable cross-section, and switches.
To Next Page
