Stahl ST10 User Manual

Chain Hoists
Original instructions

Stahl ST10 Specifications

General

Brand	Stahl
Model	ST10
Category	Chain Hoists
Language	English

Summary

Safety Instructions

2.1-2.2 Intended Use and Prohibited Operations

Defines intended use, lists inappropriate uses, and highlights operational risks.

2.3-2.4 Residual Dangers and Organisational Precautions

Identifies hazards and outlines preventative measures, organizational safety.

2.5-2.9 General Safety Measures and Regulations

2.10-2.11 Safe Operation and Load Attachment

Emphasizes safe practices, load attachment procedures, and risk avoidance.

Installation

4.1 Stationary Chain Hoist

Describes the installation of stationary hoists with safety warnings.

4.2 Chain Hoist with Trolley Assembly

Instructions for assembling the trolley and adjusting it to the runway width.

4.3-4.7 Trolley Mounting and Connections

Covers trolley installation on hoist, runway attachment, and electrical connections.

Commissioning, Operation, and Maintenance Intervals

5 Commissioning and Pre-Tests

Lists essential tests by qualified persons before first commissioning.

6.1 Duties of Crane Operator

Outlines responsibilities and safety requirements for the crane operator.

6.2-6.3 Controls and Emergency Stop

Explains control pendant functions and emergency stop procedures.

7.1 Inspection Intervals

Inspection and Maintenance

7.2-7.3 Slipping Clutch Checks and Adjustments

7.4 Adjusting Slipping Clutch with Test Load

7.5 Hoist Motor Brake Checks and Adjustments

7.7 Checking Chains

7.9 Replacing Load Chain

7.15 Checking Hook for Wear