Stamina 1130 - Assembly Instructions: Covers and Seat; Step 3: Attach Rail to Base Frame; Step 4: Attach Front and Side Covers; Step 5: Attach Seat Carriage Assembly

ASSEMBLY INSTRUCTIONS
8
STEP 3
Refer to the illustration below. Unfold the RAIL(48), and then attach to the BASE FRAME(3) with BUTTON
HEAD BOLTS(M8x1.25x20mm)(85) and WASHERS(M8)(62).
STEP 4
Slide the FRONT COVER(28) onto the LEFT and RIGHT COVERS(17, 18), then attach to the BASE
FRAME(3) with ROUND HEAD SCREW (M4.2 x 45mm)(81) .
STEP 5
Attach the SEAT(21) to the SEAT CARRIAGE(10) with ROUND HEAD BOLTS(M6x1x15mm)(63) and
WASHERS(M6)(64).
85
62
64
63
10
21
64
81
28
3
48
48
11
17
18